2007 Suzuki SX4 Keyless Entry Remote Fob Programming Instructions

Step-by-Step Procedure:

• Step 1: Remove the key from the ignition.
• Step 2: Ensure all vehicle doors are fully closed.
• Step 3: Open the driver’s door and leave it open throughout the procedure.
• Step 4: Insert the key into the ignition and turn it to the ON position (do not start the engine), then turn it back to OFF and remove the key within 10 seconds.
• Step 5: Within 20 seconds, close and open the driver’s door three times in quick succession.
• Step 6: Reinsert the key, turn it to the ON position, then turn it back to OFF and remove it within 10 seconds.
• Step 7: The door locks should cycle (lock and unlock) automatically to indicate the system has entered programming mode.
• Step 8: Press the UNLOCK button on the first remote. The door locks should cycle again to confirm successful programming.
• Step 9: If programming additional remotes, repeat Step 8 for each one individually.
• Step 10: Exit the vehicle with all keys and remotes, close the doors, and test each remote to verify functionality.