<h1>Remote Programming Instructions for 2008 Acura MDX (Keyless Entry Fob)</h1> <p><b>Important:</b> This procedure programs the remote functions only—including lock, unlock, and panic. It does not program the ignition or immobilizer chip. All steps must be completed inside the vehicle with the doors unlocked.</p> <p><b>Step-by-Step Programming Instructions:</b></p> <ul> <li>Step 1: Unlock all doors and sit in the driver’s seat.</li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine.</li> <li>Step 3: Press and release the LOCK button on the remote fob.</li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition.</li> <li>Step 5: Turn the ignition back to the ON (II) position.</li> <li>Step 6: Press the UNLOCK button on the same remote.</li> <li>Step 7: Turn the ignition to the OFF (I) position again.</li> <li>Step 8: Turn the ignition back to the ON (II) position.</li> <li>Step 9: Press the LOCK button on the remote once again.</li> <li>Step 10: Turn the ignition to the OFF (I) position.</li> <li>Step 11: Turn the ignition to the ON (II) position one final time.</li> <li>Step 12: Press and release the LOCK button. The door locks should cycle, confirming the vehicle has entered programming mode.</li> <li>Step 13: Press the LOCK button on each remote you want to program. The locks will cycle after each successful pairing. Be sure to include the remote used to initiate programming.</li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode.</li> <li>Step 15: Test all remotes to ensure that the lock and unlock functions work correctly.</li> </ul>
