<h1>2008 Acura RDX Remote Fob Programming Instructions (Remote Functions Only)</h1> <p><font size="3"><b>Important:</b> This process programs only the remote functions (lock, unlock, panic). It does not program the ignition or transponder chip. All steps must be performed from inside the vehicle with all doors unlocked. </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Unlock all doors and sit in the driver’s seat. </font></li> <li><font size="3">Step 2: Insert the key and turn the ignition to the ON (II) position. Do not start the engine. </font></li> <li><font size="3">Step 3: Press and release the LOCK button on the remote fob.</font></li> <li><font size="3"> Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </font></li> <li><font size="3">Step 5: Turn the ignition back to the ON (II) position. </font></li> <li><font size="3">Step 6: Press the UNLOCK button on the same remote. </font></li> <li><font size="3">Step 7: Turn the ignition to the OFF (I) position again. </font></li> <li><font size="3">Step 8: Turn the ignition to the ON (II) position once more. </font></li> <li><font size="3">Step 9: Press the LOCK button again on the remote. </font></li> <li><font size="3">Step 10: Turn the ignition to the OFF (I) position. </font></li> <li><font size="3">Step 11: Turn the ignition to the ON (II) position one final time. </font></li> <li><font size="3">Step 12: Press and release the LOCK button. The door locks will cycle, confirming the vehicle has entered programming mode. </font></li> <li><font size="3">Step 13: Press the LOCK button on each remote fob to be programmed, including the one already used. The locks will cycle after each remote is successfully accepted. </font></li> <li><font size="3">Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode.</font></li> <li><font size="3"> Step 15: Test each remote to ensure proper lock and unlock functionality.</font></li> </ul>
