2008 GMC Yukon

<h1>2008 GMC Yukon – Remote Fob Programming Instructions</h1> Your vehicle offers two programming procedures depending on whether it is equipped with Driver Information Center (DIC) buttons. Follow the appropriate method below. For Vehicles WITH Driver Information Center (DIC) Buttons <ul> <li>Step 1: Insert the key into the ignition and turn it to the ON position (do not start the engine). </li> <li>Step 2: Press the vehicle information button repeatedly until the display shows “PRESS TO RELEARN REMOTE KEY.” </li> <li>Step 3: Press the set/reset button. The display will update to “REMOTE KEY LEARNING ACTIVE.” </li> <li>Step 4: On the remote, press and hold both the LOCK and UNLOCK buttons at the same time for approximately 15 seconds. – A chime will sound once the remote is successfully programmed. </li> <li>Step 5: Repeat Step 4 for any additional remotes you wish to program. – The system supports up to eight remotes. </li> <li>Step 6: Turn the ignition OFF and remove the key to exit programming mode. </li> <li>Step 7: Test each remote to ensure proper functionality. </li> </ul> For Vehicles WITHOUT Driver Information Center (DIC) Buttons Make sure the vehicle is in Park, and turn the key to the ON position (without starting the engine). <ul> <li>Step 1: Press the trip odometer reset stem repeatedly until the display reads “RELEARN REMOTE KEY.” </li> <li>Step 2: Press and hold the trip odometer reset stem for about three seconds. – The message will change to “REMOTE KEY LEARNING ACTIVE.” </li> <li>Step 3: Press and hold both the LOCK and UNLOCK buttons on the first remote simultaneously for approximately 15 seconds. – A chime will sound, confirming successful programming. </li> <li>Step 4: Repeat Step 3 for each additional remote. – A maximum of eight remotes can be programmed. </li> <li>Step 5: Turn the ignition OFF and remove the key to complete the process. </li> <li>Step 6: Test all remotes to confirm they are working correctly.</li> </ul>

2008 GMC Yukon

Join our newsletter