<h1>2008 Lincoln Navigator Keyless Entry Remote Fob</h1> <p><font size="3"><strong>Step-by-Step Programming Instructions Preparation:</strong> </font></p> <ul> <li><font size="3">Step 1: Close all doors. </font></li> <li><font size="3">Step 2: Open the driver's door and press the UNLOCK button on the driver’s door panel while the door is open. </font></li> <li><font size="3">Step 3: Insert the key into the ignition. Entering Programming Mode: </font></li> <li><font size="3">Step 4: Turn the ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. </font></li> <li><font size="3">Step 5: The door locks will cycle to confirm that programming mode has been entered. Programming the First Keyless Remote: </font></li> <li><font size="3">Step 6: Within 20 seconds, press any button on the first keyless remote. </font></li> <li><font size="3">Step 7: The door locks will cycle to confirm programming. Programming the Second Keyless Remote: </font></li> <li><font size="3">Step 8: Within 20 seconds, press any button on the second keyless remote. </font></li> <li><font size="3">Step 9: The door locks will cycle again to confirm programming. Exiting Programming Mode: </font></li> <li><font size="3">Step 10: Turn the ignition to OFF. </font></li> <li><font size="3">Step 11: The door locks will cycle once more to indicate the end of the programming process.</font></li> </ul>
