2009 Acura MDX

<h1>Remote Key Fob Programming Instructions for 2009 Acura MDX</h1> Important: This procedure programs the remote control functions only—such as lock, unlock, and panic. It does not program the ignition or immobilizer chip. All steps must be performed inside the vehicle with the doors unlocked. Step-by-Step Programming Instructions: <ul> <li>Step 1: Unlock all doors and remain seated in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position (dashboard lights on, engine off). </li> <li>Step 3: Press and release the LOCK button on the remote. </li> <li>Step 4: Turn the ignition to the OFF (I) position, leaving the key inserted. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition back to the ON (II) position. </li> <li>Step 9: Press the LOCK button on the same remote once again. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, confirming the system is now in programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one used to start the process. The locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to complete the process. </li> <li>Step 15: Test all remotes to ensure proper operation.</li> </ul>

2009 Acura MDX

Join our newsletter