2009 Acura RDX

<h1>2009 Acura RDX Remote Keyless Entry Fob Programming Instructions (Remote Functions Only)</h1> Important: This procedure programs only the remote control features such as lock, unlock, and panic. It does not program the ignition or transponder chip. All steps must be completed inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Ensure all doors are unlocked and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote fob.</li> <li> Step 4: Turn the ignition to the OFF (I) position. Keep the key in the ignition.</li> <li> Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote.</li> <li> Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition to the ON (II) position once more. </li> <li>Step 9: Press the LOCK button again on the remote.</li> <li> Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position for the final time.</li> <li> Step 12: Press and release the LOCK button. The door locks will cycle, indicating the system has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote fob you wish to program, including the one already used. The door locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all programmed remotes to ensure lock and unlock functions are working properly.</li> </ul>

2009 Acura RDX

Join our newsletter