2009 GMC Yukon Denali

<h1>2009 GMC Yukon Denali Keyless Entry Remote Fob (Smart Key)</h1> Important Notice: The 2009 GMC Yukon Denali supports onboard programming for keyless entry remote fobs. The procedure varies depending on whether your vehicle is equipped with Driver Information Center (DIC) buttons or not. No specialized equipment is required for this process. Programming Procedure For Vehicles with Driver Information Center (DIC) Buttons: <ul> <li>Step 1: Access the Driver Information Menu Insert the key into the ignition and turn it to the ON position (do not start the engine). Use the vehicle information button to scroll until the display shows: “PRESS TO RELEARN REMOTE KEY.” </li> <li>Step 2: Activate Remote Programming Mode Press the SET/RESET button. The display will change to: “REMOTE KEY LEARNING ACTIVE.” </li> <li>Step 3: Program the First Remote Press and hold the LOCK and UNLOCK buttons on the remote simultaneously for about 15 seconds. – A chime will sound, confirming that the remote has been successfully programmed. </li> <li>Step 4: Add Additional Remotes Repeat Step 3 for each additional remote you wish to program. Up to eight remotes can be registered. </li> <li>Step 5: Complete the Process Turn the key to the OFF position and remove it from the ignition. Test all remotes to verify functionality. </li> </ul> For Vehicles Without DIC Buttons: <ul> <li>Step 1: Enter Relearn Mode Ensure the vehicle is in Park (P) and turn the ignition to the ON position (without starting the engine). Press the trip odometer reset stem repeatedly until the display reads: “RELEARN REMOTE KEY.” </li> <li>Step 2: Initiate Remote Learning Press and hold the trip odometer reset stem for three seconds until the display changes to: “REMOTE KEY LEARNING ACTIVE.” </li> <li>Step 3: Program the First Remote Press and hold both the LOCK and UNLOCK buttons on the remote at the same time for approximately 15 seconds. – A chime will sound to confirm successful programming. </li> <li>Step 4: Add Additional Remotes Repeat Step 3 for each remote you want to program. A total of eight remotes can be programmed. </li> <li>Step 5: Finalize Programming Turn the ignition to the OFF position and remove the key. Test all remotes to ensure they are working properly.</li> </ul> Additional Considerations: <ul> <li>Programming Limit: A maximum of eight remote fobs can be stored in the system. </li> <li>Confirmation Sound: A chime confirms each remote has been successfully learned. </li> <li>Repeat Process if Needed: If the chime is not heard, or the system does not respond, restart the process from the beginning.</li> <li>Battery Health: Make sure remote batteries are fully charged before beginning.</li> </ul>

2009 GMC Yukon Denali

Join our newsletter