<h1>2009 Lexus RX350 Keyless Entry Remote Fob</h1> <p><font size="3"><b>Smart Key Important Information:</b> This vehicle is not on-board programmable and requires specialized equipment to program the smart key remote fobs. You can program multiple remotes at the same time. </font></p> <p><font size="3"><b>Step-by-Step Instructions for Programming the Remote Fob:</b> </font></p> <ul> <li><font size="3">Step 1: Prepare the Vehicle Ensure the vehicle is in ""Park"". Open the driver’s door and leave it open, all other doors should be closed. Make sure that the vehicle is unlocked. </font></li> <li><font size="3">Step 2: Enter Programming Mode Insert the key into the ignition, but do not turn it. Remove the key from the ignition. Repeat the process (insert the key again and remove it) for a total of two times. After this, close and open the driver’s door. </font></li> <li><font size="3">Step 3: Start the Key Registration Process Insert the key into the ignition (leave it in the ignition). Close the driver’s door. Turn the ignition to the ON position, then back to OFF (do not start the vehicle). Remove the key from the ignition. </font></li> <li><font size="3">Step 4: Confirm Programming Mode Activation Within 3 seconds, the vehicle’s door locks should cycle (lock and unlock) automatically, indicating the system has successfully entered programming mode. If the locks do not cycle, start again from Step 1. </font></li> <li><font size="3">Step 5: Program the Remote(s) Press and hold both the LOCK and UNLOCK buttons on the remote for at least 1.5 seconds. After releasing the buttons, press the LOCK button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once. This indicates the remote has been successfully programmed. If the door locks cycle twice, the remote was not accepted. Repeat the steps in Step 5. </font></li> <li><font size="3">Step 6: Program Additional Remotes Repeat Step 5 for any additional remotes. You can program up to 4 remotes at once. </font></li> <li><font size="3">Step 7: Complete the Programming Process After all remotes have been successfully programmed, open the driver’s door to exit programming mode. </font></li> </ul> <p><font size="3"><b>What Are Your Options?</b> </font></p> <p><font size="3">Rent specialized programming equipment if needed. Ensure the equipment is compatible with your Lexus RX350. </font></p> <p><font size="3"><b>Additional Notes:</b> </font></p> <ul> <li><font size="3">Battery Health: Make sure that the remote’s battery is fresh and correctly installed. </font></li> <li><font size="3">Timing: Complete each step promptly, as there is a limited time window for each action. </font></li> <li><font size="3">Key Programming: These instructions only program the remote portion of the key fob. If you need to program the key portion of the fob, specialized equipment is required.</font></li> </ul>
