<h1>2009 Lincoln Navigator – Remote Fob Programming Instructions</h1> <p><font size="3"><b>System Type:</b> Remote Keyless Entry (Onboard Programmable) Requirements: Vehicle key, keyless remote(s)</font></p> <p><font size="3"><b> Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Close all doors. Open the driver’s door and press the UNLOCK button on the interior door panel. </font></li> <li><font size="3">Step 2: Insert the key into the ignition. </font></li> <li><font size="3">Step 3: Turn the ignition from OFF to RUN 8 times within 10 seconds, ending in the RUN position on the 8th turn. The door locks will cycle to indicate entry into programming mode. </font></li> <li><font size="3">Step 4: Within 20 seconds, press any button on the first remote. The locks will cycle to confirm programming. </font></li> <li><font size="3">Step 5: Within 20 seconds, press any button on the second remote (if applicable). Locks will cycle again to confirm programming.</font></li> <li><font size="3"> Step 6: Turn the ignition to OFF. The locks will cycle once more to signal the end of programming mode.</font></li> </ul>
