2010 Acura MDX

<h1>Program the Remote Fob for a 2010 Acura MDX</h1> Important: This procedure programs the remote control functions only (lock, unlock, panic). It does not program the ignition or transponder chip. Be sure all doors are unlocked before starting the process. Step-by-Step Programming Instructions: <ul> <li>Step 1: Ensure all doors are unlocked and you are seated inside the vehicle. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote you wish to program. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition back to the ON (II) position. </li> <li>Step 9: Press the LOCK button again on the same remote. </li> <li>Step 10: Turn the ignition to the OFF (I) position once more. </li> <li>Step 11: Turn the ignition to the ON (II) position a final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, indicating that the system has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one used to initiate the process. The locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to confirm they operate the lock and unlock functions properly.</li> </ul>

2010 Acura MDX

Join our newsletter