2010 Acura RDX

<h1>2010 Acura RDX Remote Keyless Entry Fob Programming Instructions (Remote Functions Only)</h1> Important: This procedure allows you to program only the remote features (lock, unlock, panic). It does not program the ignition or immobilizer chip. Perform all steps inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Unlock all doors and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote you want to program.</li> <li> Step 4: Turn the ignition to the OFF (I) position. Leave the key in place. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position. </li> <li>Step 8: Turn the ignition back to the ON (II) position. </li> <li>Step 9: Press the LOCK button again on the remote. </li> <li>Step 10: Turn the ignition to the OFF (I) position once more. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. The door locks should cycle, indicating the system has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program. The locks will cycle after each successful entry. Be sure to include the first remote in this step. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to complete the process.</li> <li> Step 15: Test all remotes to ensure lock and unlock functions are working properly.</li> </ul>

2010 Acura RDX

Join our newsletter