<h1>2010 GMC Acadia – Remote Reprogramming Instructions</h1> <p><font size="3"><b>System Type:</b> Driver Information Center-Enabled </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Insert your ignition key and turn it to the ON position. Do not start the engine. </font></li> <li><font size="3">Step 2: Press the vehicle information button on the dashboard repeatedly until the display reads “PRESS TO RELEARN REMOTE KEY.” </font></li> <li><font size="3">Step 3: Press the SET/RESET button to activate remote key learning. The display will change to “REMOTE KEY LEARNING ACTIVE.” </font></li> <li><font size="3">Step 4: With the first remote in hand, press and hold both the LOCK and UNLOCK buttons simultaneously. </font></li> <li><font size="3">Step 5: Continue holding for approximately 15 seconds, or until you hear a chime, indicating successful programming. </font></li> <li><font size="3">Step 6: Repeat the same process for any other remotes. The vehicle can accept up to eight remotes. </font></li> <li><font size="3">Step 7: Once all remotes are programmed, turn the ignition OFF and remove the key. </font></li> <li><font size="3">Step 8: Test each remote to ensure all buttons are functioning as expected.</font></li> </ul>
