2010 GMC Yukon

<h1>2010 GMC Yukon Keyless Entry Remote Fob (Smart Key)</h1> Important Note: The 2010 GMC Yukon supports onboard remote programming through the vehicle's Driver Information Center (DIC). The procedure differs based on whether or not your vehicle is equipped with DIC buttons. For Vehicles with Driver Information Center (DIC) Buttons: <ul> <li>Step 1: Insert the key into the ignition and turn it to the ON position without starting the engine. </li> <li>Step 2: Press the "Vehicle Information" button repeatedly until the display shows "PRESS TO RELEARN REMOTE KEY." </li> <li>Step 3: Press the "Set/Reset" button. The display will change to "REMOTE KEY LEARNING ACTIVE." </li> <li>Step 4: On the remote fob, press and hold both the Lock and Unlock buttons at the same time for approximately fifteen seconds. A chime will sound to confirm successful programming. </li> <li>Step 5: To program additional remotes, repeat Step 4 for each remote. The vehicle can store up to eight remotes. </li> <li>Step 6: Turn the ignition off and remove the key to exit programming mode. Test each remote to ensure functionality.</li> </ul> For Vehicles without DIC Buttons: <ul> <li>Step 1: Ensure the vehicle is in Park. Insert the key and turn it to the ON position without starting the engine. </li> <li>Step 2: Press the trip odometer reset stem repeatedly until "RELEARN REMOTE KEY" appears on the display. </li> <li>Step 3: Press and hold the trip odometer reset stem for three seconds until the message changes to "REMOTE KEY LEARNING ACTIVE." </li> <li>Step 4: On the first remote, press and hold the Lock and Unlock buttons simultaneously for approximately fifteen seconds. A chime will confirm successful programming. </li> <li>Step 5: To program additional remotes, repeat Step 4 for each one. A maximum of eight remotes can be programmed. </li> <li>Step 6: Turn the ignition off and remove the key to complete the process. Test each remote to verify proper operation.</li> </ul>

2010 GMC Yukon

Join our newsletter