2010 Lexus GS350

<h1>2010 Lexus GS350 – Keyless Entry Remote Fob Programming Instructions</h1> Note: The 2010 Lexus GS350 does not support onboard programming for smart key remote fobs. Programming requires the use of specialized diagnostic equipment capable of interfacing with the vehicle's electronic control modules. Step-by-Step Programming Instructions: <ul> <li>Step 1: Confirm that the replacement smart key remote fob is compatible with the 2010 Lexus GS350, including correct part number, frequency, and FCC ID. </li> <li>Step 2: Ensure that the vehicle’s battery is fully charged and that all doors, the trunk, and the hood are securely closed to avoid interruptions during the programming process. </li> <li>Step 3: Use a professional-grade diagnostic tool to connect to the vehicle’s OBD-II port, located beneath the dashboard on the driver’s side. This tool will communicate with the vehicle’s Body Control Module (BCM) and Smart Key ECU. </li> <li>Step 4: Navigate through the diagnostic tool’s interface to access the Keyless Entry or Smart Key Programming section. </li> <li>Step 5: Follow the on-screen instructions on the diagnostic tool to program the new smart key remote fob. You may need to insert the original key or fob into the ignition or press specific buttons on the remote to confirm the programming. </li> <li>Step 6: If additional remotes need to be programmed, repeat the process for each remote during the same session to ensure they are all correctly registered with the vehicle. </li> <li>Step 7: After programming, follow the diagnostic tool’s instructions to exit programming mode and disconnect the diagnostic tool from the OBD-II port. </li> <li>Step 8: Test each newly programmed remote fob to ensure proper functionality, including lock, unlock, trunk release, and engine start/stop functions.</li> </ul>

2010 Lexus GS350

Join our newsletter