<h1>2010 Lincoln Navigator – Remote Fob Programming Instructions</h1> <p><font size="3"><b>System Type:</b> Remote Keyless Entry (Onboard Programmable) Requirements: Vehicle key, keyless remote(s) </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Ensure all doors are closed. Open the driver’s door and press the UNLOCK button on the door panel. </font></li> <li><font size="3">Step 2: Insert the key into the ignition. </font></li> <li><font size="3">Step 3: Turn the ignition from OFF to RUN 8 times within 10 seconds, ending on RUN the 8th time. Door locks will cycle, indicating programming mode is active. </font></li> <li><font size="3">Step 4 : Within 20 seconds, press any button on the first remote. Locks will cycle to confirm programming. </font></li> <li><font size="3">Step 5 : Within 20 seconds, press any button on the second remote, if desired. Locks will cycle again to confirm. </font></li> <li><font size="3">Step 6: Turn the ignition to OFF. Locks will cycle once more to exit programming mode.</font></li> </ul>
