<h1>2010 Lincoln Town Car – Programming a Keyless Entry Remote</h1> <p><font size="3"><b>System Type:</b> Supports Onboard Remote Registration </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Ensure all doors and the trunk are completely closed. </font></li> <li><font size="3">Step 2: Open the driver’s door and press the UNLOCK button on the interior panel. Leave the door open. </font></li> <li><font size="3">Step 3: Insert the key into the ignition. </font></li> <li><font size="3">Step 4: Turn the key from OFF to RUN eight times in under 10 seconds, ending on RUN the eighth time. </font></li> <li><font size="3">Step 5: The door locks will cycle to confirm that the system is in programming mode. </font></li> <li><font size="3">Step 6: Press any button on the first remote within 20 seconds. The locks will cycle again to confirm programming. </font></li> <li><font size="3">Step 7: Repeat for a second remote within the same 20-second window, if needed. </font></li> <li><font size="3">Step 8: Turn the ignition to OFF. A final lock cycle will indicate that programming is complete.</font></li> </ul>
