2011 Acura MDX

<h1>2011 Acura MDX Remote Fob Programming Instructions (Remote Functions Only)</h1> Important: This procedure programs only the remote control functions (lock, unlock, panic). It does not program the ignition or immobilizer chip. All steps must be completed inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Unlock all doors and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote fob. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition back to the ON (II) position. </li> <li>Step 9: Press the LOCK button on the same remote once more. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position a final time. </li> <li>Step 12: Press and release the LOCK button. The door locks will cycle, confirming the vehicle has entered programming mode. </li> <li>Step 13: Press the LOCK button on each remote you wish to program, including the one used to begin the process. The locks will cycle after each successful registration. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to confirm proper operation of locking and unlocking functions.</li> </ul>

2011 Acura MDX

Join our newsletter