2011 Lincoln MKZ

Programming a Remote Head Key for 2011 Lincoln MKZ

Important: This procedure allows you to manually program an additional remote head key using your vehicle’s onboard system. To complete this method, you must have two previously programmed keys. Without two working keys, the process cannot be completed. Perform all steps in sequence with correct timing. Do not attempt to start the engine during programming. Wait at least 10 seconds before repeating the process if a step fails. Carefully review the full procedure before beginning.

Remote Head Key Programming Steps:

  • Step 1: Ensure all doors are closed and the vehicle is turned off.
  • Step 2: Insert the first programmed key into the ignition.
  • Step 3: Turn the ignition from OFF to ON (do not start the vehicle).
  • Step 4: Keep the ignition ON for at least 3 seconds, but no more than 10 seconds.
  • Step 5: Turn the ignition OFF and remove the first key.
  • Step 6: Wait 3 to 10 seconds.
  • Step 7: Insert the second programmed key into the ignition.
  • Step 8: Turn the ignition from OFF to ON again.
  • Step 9: Keep the ignition ON for at least 3 seconds, but no more than 10 seconds.
  • Step 10: Turn the ignition OFF and remove the second key.
  • Step 11: Wait 3 to 10 seconds.
  • Step 12: Insert the new, unprogrammed key into the ignition.
  • Step 13: Turn the ignition from OFF to ON.
  • Step 14: Keep the ignition ON for at least 6 seconds to complete programming.
  • Step 15: Turn the ignition OFF and remove the new key.
  • Step 16: Test the newly programmed key by starting the engine to confirm functionality.
  • Step 17: If the key includes remote entry functions, test the lock and unlock buttons to ensure full operation.