<h1>2011 Lincoln Town Car – Remote Programming Procedure</h1> <p><font size="3"><b>System Type:</b> Standard Key Ignition; Onboard Fob Programming </font></p> <p><font size="3"><b>Step-by-Step Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Make sure all four doors are closed. </font></li> <li><font size="3">Step 2: Open the driver’s door and press the UNLOCK button on the armrest. Leave the door open. </font></li> <li><font size="3">Step 3: Insert the key into the ignition. </font></li> <li><font size="3">Step 4: Turn the key from OFF to RUN eight times in under 10 seconds, ending on RUN on the eighth turn. </font></li> <li><font size="3">Step 5: The door locks will cycle to confirm that programming mode is active. </font></li> <li><font size="3">Step 6: Press any button on the first remote within 20 seconds. The locks will cycle again to confirm programming. </font></li> <li><font size="3">Step 7: Repeat the same step for a second remote, if desired, within the 20-second window. </font></li> <li><font size="3">Step 8: Turn the key to OFF. One final lock cycle confirms the programming session has ended.</font></li> </ul>
