2012 Acura MDX

<h1>2012 Acura MDX Remote Fob Programming Instructions (Remote Functions Only)</h1> Important: This process programs only the remote control features (lock, unlock, panic). It does not program the ignition or transponder chip. Complete all steps from inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Ensure all doors are unlocked and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position—dashboard lights on, engine off. </li> <li>Step 3: Press and release the LOCK button on the remote fob. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key in the ignition. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition back to the OFF (I) position. </li> <li>Step 8: Turn the ignition to the ON (II) position again. </li> <li>Step 9: Press the LOCK button on the same remote. </li> <li>Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. If done correctly, the door locks will cycle, indicating the vehicle has entered programming mode. </li> <li>Step 13: Press the LOCK button on every remote you want to program, including the one just used. The locks will cycle after each remote is accepted. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to ensure lock and unlock functions work correctly.</li> </ul>

2012 Acura MDX

Join our newsletter