<h1>Keyless Entry Remote Programming Instructions – 2012 Honda Ridgeline</h1> <p><font size="3"><b>Important Notes:</b> This procedure programs the remote (keyless entry) portion only. The key blade or integrated key must still be professionally programmed to start the engine. A working key that can currently start your vehicle is required to perform this procedure. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions</b> </font></p> <ul> <li><font size="3">Step 1: Insert the working key into the ignition and turn it to the ON position (do not start the engine). </font></li> <li><font size="3">Step 2: Within 1 to 4 seconds, press the LOCK or UNLOCK button on the remote, pointing it at the instrument panel. </font></li> <li><font size="3">Step 3: Turn the ignition to the OFF position within 1 to 4 seconds. </font></li> <li><font size="3">Step 4: Repeat this ON–button–OFF cycle two more times: Turn ignition to ON Press LOCK or UNLOCK Turn ignition to OFF </font></li> <li><font size="3">Step 5: After the third cycle, turn the ignition to ON one more time. </font></li> <li><font size="3">Step 6: Press the LOCK or UNLOCK button again on the same remote. The door locks should cycle automatically, confirming entry into programming mode. </font></li> <li><font size="3">Step 7: Within 1 to 4 seconds, press the LOCK or UNLOCK button again to store the code for that remote. </font></li> <li><font size="3">Step 8: To program additional remotes (up to three in total), do so within 15 seconds. Aim each remote at the instrument panel and press LOCK or UNLOCK. The door locks should cycle after each remote is accepted. </font></li> <li><font size="3">Step 9: Turn the ignition switch to the OFF position and remove the key. </font></li> <li><font size="3">Step 10: Test each remote to ensure all buttons and functions operate correctly.</font></li> </ul>
