2012 Subaru XV Crosstrek Smart Key Remote Fob Programming Instructions

Important Notice: The 2012 Subaru XV Crosstrek is equipped with a Smart Key system that requires electronic registration of the fob to the vehicle's computer. This model does not support manual or onboard programming. Programming must be performed by a professional using specialized equipment.

Programming Procedure (Requires Professional Equipment)

• Step 1: Confirm that your XV Crosstrek uses a Smart Key system, typically indicated by features such as push-button start and keyless access.
• Step 2: Obtain a Smart Key fob that is fully compatible with the 2012 XV Crosstrek. Verify part number and frequency to ensure a correct match.
• Step 3: Schedule service with a certified automotive technician who has access to Subaru-specific diagnostic tools (e.g., Subaru Select Monitor or equivalent).
• Step 4: The technician will: Connect a diagnostic scanner to the vehicle's OBD-II port Authenticate access to the vehicle's Body Control Module (BCM) Enter Smart Key registration mode using the tool
• Step 5: The new Smart Key fob is then registered electronically: Each button and function will be validated Proximity and ignition functions are tested to confirm signal accuracy
• Step 6: The system supports programming of up to four Smart Key fobs. If any fobs are missing or lost, they can be removed from the system to maintain vehicle security.
• Step 7: After programming, all remote functions should be tested: Keyless locking/unlocking Push-button engine start Remote panic or hatch release (if applicable)

Additional Notes:

• The vehicle must be present and in good condition for programming to proceed. A new battery should be installed in the fob prior to registration. For best results, ensure all current fobs are present during programming to avoid unintentional deletion.