2013 Acura MDX

<h1>2013 Acura MDX Remote Fob Programming Instructions (Remote Functions Only)</h1> Important: This procedure programs only the remote features (lock, unlock, panic) of the fob. It does not program the ignition or immobilizer chip. All steps must be performed inside the vehicle with all doors unlocked. Step-by-Step Instructions: <ul> <li>Step 1: Unlock all doors and sit in the driver’s seat. </li> <li>Step 2: Insert the key into the ignition and turn it to the ON (II) position. Do not start the engine. </li> <li>Step 3: Press and release the LOCK button on the remote. </li> <li>Step 4: Turn the ignition to the OFF (I) position. Leave the key inserted. </li> <li>Step 5: Turn the ignition back to the ON (II) position. </li> <li>Step 6: Press the UNLOCK button on the same remote. </li> <li>Step 7: Turn the ignition to the OFF (I) position again. </li> <li>Step 8: Turn the ignition back to the ON (II) position. </li> <li>Step 9: Press the LOCK button again on the same remote.</li> <li> Step 10: Turn the ignition to the OFF (I) position. </li> <li>Step 11: Turn the ignition to the ON (II) position one final time. </li> <li>Step 12: Press and release the LOCK button. If successful, the door locks will cycle, indicating that programming mode is active. </li> <li>Step 13: Press the LOCK button on each remote you want to program, including the one used to start the process. The locks will cycle after each remote is accepted. </li> <li>Step 14: Turn the ignition to the OFF (I) position and remove the key to exit programming mode. </li> <li>Step 15: Test all remotes to confirm that locking and unlocking functions work properly.</li> </ul>

2013 Acura MDX

Join our newsletter