<h1>Keyless Entry Remote Programming Instructions – 2013 Honda Ridgeline</h1> <p><font size="3"><b>Important Notes:</b> This procedure is for programming the remote (keyless entry) functions only. The key blade or integrated key must still be professionally programmed to enable engine starting. A fully functional, already-programmed key that can start the vehicle is required to perform this procedure. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions</b> </font></p> <ul> <li><font size="3">Step 1: Insert your working key into the ignition and turn it to the ON position (do not start the engine). </font></li> <li><font size="3">Step 2: Within 1 to 4 seconds, press the LOCK or UNLOCK button on the remote, aiming it at the instrument panel. </font></li> <li><font size="3">Step 3: Within 1 to 4 seconds, turn the ignition switch to the OFF position. </font></li> <li><font size="3">Step 4: Repeat this ON–button–OFF cycle two more times: Turn ignition to ON Press LOCK or UNLOCK Turn ignition to OFF </font></li> <li><font size="3">Step 5: On the fourth cycle, turn the ignition to ON again. </font></li> <li><font size="3">Step 6: Press the LOCK or UNLOCK button once more on the same remote. If successful, the door locks will cycle automatically, confirming the system has entered programming mode. </font></li> <li><font size="3">Step 7: Within 1 to 4 seconds, press the LOCK or UNLOCK button again to save the code. </font></li> <li><font size="3">Step 8: If you have additional remotes (up to three total), program them within 15 seconds: Point each remote at the instrument panel Press LOCK or UNLOCK Listen for the lock cycle after each successful programming </font></li> <li><font size="3">Step 9: Turn the ignition switch to OFF and remove the key. </font></li> <li><font size="3">Step 10: Test all programmed remotes to confirm proper operation.</font></li> </ul>
