2013 Land Rover Range Rover

<h1>2013 Land Rover Range Rover – Keyless Entry Remote Fob Programming Instructions</h1> Note: The 2013 Land Rover Range Rover does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment to interface with the vehicle’s keyless entry and security systems. Step-by-Step Programming Instructions: <ul> <li>Step 1: Verify that the replacement smart key remote fob is compatible with the 2013 Land Rover Range Rover, including the correct part number and operating frequency. </li> <li>Step 2: Confirm that the vehicle’s battery is fully charged, and that all doors, the trunk, and the hood are closed to avoid interruptions during the programming process. </li> <li>Step 3: Use a professional-grade diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to connect to the OBD-II port, located beneath the dashboard on the driver’s side. This tool will communicate with the vehicle’s Body Control Module (BCM) and keyless entry system. </li> <li>Step 4: Using the diagnostic tool, navigate to the Body Control Module (BCM) or Keyless Entry section to begin the programming process. </li> <li>Step 5: Follow the instructions on the diagnostic tool to program the new smart key remote fob. You may need to insert the original key or fob into the ignition or press specific buttons on the remote to confirm the programming. </li> <li>Step 6: If additional remotes need to be programmed, repeat the process for each one during the same session. Ensure that all remotes are programmed together, as unprogrammed remotes will no longer function. </li> <li>Step 7: Once all remotes have been successfully programmed, follow the diagnostic tool’s instructions to exit programming mode. Disconnect the diagnostic tool from the OBD-II port. </li> <li>Step 8: Test each programmed remote to ensure proper operation of functions such as lock, unlock, remote start, and panic.</li> </ul>

2013 Land Rover Range Rover

Join our newsletter