2013 Suzuki SX4

2013 Suzuki SX4 Keyless Entry Remote Fob Programming Instructions

For Vehicles with Standard Key and Remote Fob (Non-Smart Key System)

Programming Procedure:

  • Step 1: Remove the key from the ignition.
  • Step 2: Ensure all doors are fully closed.
  • Step 3: Open the driver’s door and keep it open throughout the procedure.
  • Step 4: Insert the key into the ignition, turn it to the ON position (without starting the engine), then turn it OFF and remove it—all within 10 seconds.
  • Step 5: Within the next 20 seconds, quickly close and open the driver’s door three times.
  • Step 6: Reinsert the key, turn it to the ON position, then turn it OFF and remove it again—within 10 seconds.
  • Step 7: The door locks should automatically lock and unlock, indicating that the vehicle has entered programming mode.
  • Step 8: Press the UNLOCK button on the remote fob. The locks should cycle again to confirm the remote has been successfully programmed.
  • Step 9: Repeat Step 8 for each additional remote.
  • Step 10: Exit the vehicle, close all doors, and test each remote to ensure proper operation. 2013 Smart Key Remote Fob Programming Instructions For Vehicles Equipped with a Smart Key System

Important Notice:

  • This vehicle is not equipped with onboard programming capabilities for Smart Key remote fobs. Specialized diagnostic tools are required to complete the programming process. To program a Smart Key remote: Schedule service with a professional technician who has access to vehicle-specific programming equipment. Have all Smart Key remotes present during the session, as some systems require all keys to be programmed together. Be prepared to provide proof of ownership if no working keys are available. Once programming is completed, test each Smart Key to confirm that both keyless entry and push-button start functions operate as expected.