<h1>Keyless Entry Remote Programming Instructions – 2014 Honda Ridgeline</h1> <p><font size="3"><b>Important Information:</b> This procedure only programs the remote (keyless entry) functions. The key blade or combo key must still be programmed separately by a professional to start the vehicle. You must use a working key that can start the engine to complete the process. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions</b> </font></p> <ul> <li><font size="3">Step 1: Insert the working key into the ignition and turn it to the ON position (do not start the engine). </font></li> <li><font size="3">Step 2: Within 1 to 4 seconds, press the LOCK or UNLOCK button on the remote, aiming it at the instrument panel. </font></li> <li><font size="3">Step 3: Turn the ignition switch to the OFF position within 1 to 4 seconds. </font></li> <li><font size="3">Step 4: Repeat this ON–button press–OFF cycle two more times using the same remote: Turn ignition to ON Press LOCK or UNLOCK Turn ignition to OFF </font></li> <li><font size="3">Step 5: On the fourth cycle, turn the ignition to the ON position once more. </font></li> <li><font size="3">Step 6: Press the LOCK or UNLOCK button again on the same remote. The door locks should automatically cycle, indicating that the vehicle has entered programming mode. </font></li> <li><font size="3">Step 7: Within 1 to 4 seconds, press the LOCK or UNLOCK button again to store the code. </font></li> <li><font size="3">Step 8: If you wish to program additional remotes (up to three total), do so within 15 seconds: Aim each remote at the instrument panel Press LOCK or UNLOCK Wait for the door locks to cycle after each remote is accepted </font></li> <li><font size="3">Step 9: Turn the ignition to the OFF position and remove the key. </font></li> <li><font size="3">Step 10: Test each remote to verify that all functions are working properly.</font></li> </ul>
