<h1>2015 GMC Terrain — Keyless Entry Remote Fob Programming (Flip Key and Smart Key)</h1> <p><font size="3"> This vehicle allows self-programming of additional keys if at least one working key is available. If no keys are available, follow the longer learning procedure described below. </font></p> <p><font size="3"><b>If All Keys Are Lost (Flip Key Models)</b> </font></p> <p><font size="3">If you no longer have any programmed keys, follow this method to pair the first one. The process takes approximately 30 minutes. </font></p> <ul> <li><font size="3">Step 1: Insert the new key into the ignition and turn it to the ON/RUN position. The security light on the dash will illuminate. </font></li> <li><font size="3">Step 2: Keep the ignition in the ON/RUN position for approximately 10 minutes, until the security light turns off. </font></li> <li><font size="3">Step 3: Turn the key to the OFF position and wait a few seconds. </font></li> <li><font size="3">Step 4: Repeat Steps 1 through 3 two more times. After the third cycle, turn the key back to ON/RUN. The security light should no longer be illuminated. </font></li> <li><font size="3">Step 5: The key is now programmed. All previously recognized keys will be erased. </font></li> <li><font size="3">Step 6: To add more keys, follow the next section.</font></li> </ul> <p><font size="3"><b> If You Have One Working Flip Key and Want to Add Another</b> </font></p> <p><font size="3">You can easily program a new key if you already have one that works. </font></p> <ul> <li><font size="3">Step 1: Insert your existing programmed key into the ignition and turn it to the ON/RUN position until the dashboard lights come on. </font></li> <li><font size="3">Step 2: Turn the key to the OFF position and remove it. </font></li> <li><font size="3">Step 3: Within five seconds, insert the new key you wish to program and turn it to the ON/RUN position. </font></li> <li><font size="3">Step 4: Wait for the security light to turn off. This confirms the key has been successfully programmed. </font></li> <li><font size="3">Step 5: Repeat these steps to program additional keys if needed. </font></li> </ul> <p><font size="3"><b>If You Have a Recognized Smart Transmitter (Smart Key Models Only)</b></font></p> <p><font size="3"> If equipped with a smart key system, follow these steps to add an additional transmitter. </font></p> <ul> <li><font size="3">Step 1: Place a recognized smart key inside the vehicle. </font></li> <li><font size="3">Step 2: Insert or position the new transmitter in the designated slot or detection area. </font></li> <li><font size="3">Step 3: Use the ignition button or follow prompts on the Driver Information Center (DIC) to begin the programming process. </font></li> <li><font size="3">Step 4: After the transmitter is learned, test the lock/unlock functions to ensure successful pairing. Note: Only a limited number of transmitters can be programmed. Always test each one after the process is complete.</font></li> </ul>
