<h1>2015 Land Rover Discovery Sport – Keyless Entry Remote Fob Programming Instructions</h1> <p><font size="3"><b>Note:</b> The 2015 Land Rover Discovery Sport does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment that can communicate with the vehicle’s keyless entry and security systems.</font></p> <p><font size="3"><b>Step-by-Step Programming Instructions:</b></font></p> <ul> <li><font size="3">Step 1: Verify that the replacement smart key remote fob is compatible with the 2015 Land Rover Discovery Sport, including the correct part number and frequency.</font></li> <li><font size="3">Step 2: Ensure the vehicle’s battery is fully charged and all doors, the hood, and the tailgate are closed to avoid interruptions during the programming process.</font></li> <li><font size="3">Step 3: Connect a compatible diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to the OBD-II port located beneath the dashboard on the driver’s side.</font></li> <li><font size="3">Step 4: Use the diagnostic tool to access the vehicle’s Body Control Module (BCM) or Keyless Entry/Immobilizer section.</font></li> <li><font size="3">Step 5: Follow the on-screen instructions to initiate the key fob programming process. This may include inserting the original key into the ignition or holding the new fob near a designated area.</font></li> <li><font size="3">Step 6: If programming additional remotes, repeat the process for each one during the same session. All remotes must be programmed at once; otherwise, previously programmed fobs may no longer function.</font></li> <li><font size="3">Step 7: After successful programming, follow the diagnostic tool’s prompts to exit programming mode, and disconnect it from the OBD-II port.</font></li> <li><font size="3">Step 8: Test all programmed remotes to ensure full functionality, including lock/unlock, remote start (if equipped), and panic features.</font></li> </ul>
