2015 Lincoln MKZ

Programming a Remote Head Key for 2015 Lincoln MKZ

Important: This procedure enables you to program a spare Intelligent Access key for a 2015 vehicle with push-button start. You must have two currently programmed keys and one new, unprogrammed key. If only one key is available, this process will not work. Make sure the vehicle is turned off and all doors are closed before starting. Follow each step in order and observe all timing instructions. If the procedure is not successful, wait 10 seconds before repeating. Read the complete instructions before beginning.

Intelligent Access Key Programming Steps:

  • Step 1: Confirm that the vehicle is off and all doors are securely closed.
  • Step 2: Remove the rubber mat from the cupholder to access the backup slot at the bottom.
  • Step 3: Place the first programmed Intelligent Access key into the backup slot with the buttons facing downward.
  • Step 4: Press the START/STOP button once (do not press the brake pedal).
  • Step 5: Wait 5 seconds.
  • Step 6: Press the START/STOP button again to turn off the system.
  • Step 7: Remove the first key from the slot.
  • Step 8: Within 10 seconds, place the second programmed key into the same backup slot.
  • Step 9: Press the START/STOP button once.
  • Step 10: Wait 5 seconds.
  • Step 11: Press the START/STOP button again to turn off the system.
  • Step 12: Remove the second key from the slot.
  • Step 13: Wait 5 seconds, then insert the new, unprogrammed key into the backup slot.
  • Step 14: Press the START/STOP button once. The system will now attempt to program the new key.
  • Step 15: Remove the new key from the slot.
  • Step 16: Test the newly programmed key by using the lock/unlock functions and starting the vehicle.
  • Step 17: If programming fails, wait 10 seconds, then repeat steps 1 through 16.