2016 Land Rover Discovery Sport

<h1>2016 Land Rover Discovery Sport – Keyless Entry Remote Fob Programming Instructions</h1> Note: The 2016 Land Rover Discovery Sport does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment to interface with the vehicle’s keyless entry and security systems. Step-by-Step Programming Instructions: <ul> <li>Step 1: Verify that the replacement smart key remote fob is compatible with the 2016 Land Rover Discovery Sport, including the correct part number and operating frequency.</li> <li>Step 2: Ensure the vehicle’s battery is fully charged, and close all doors, the trunk, and the hood to avoid interruptions during the programming process.</li> <li>Step 3: Connect a compatible diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to the OBD-II port, located beneath the dashboard on the driver’s side.</li> <li>Step 4: Use the diagnostic tool to navigate to the Body Control Module (BCM) or Keyless Entry section.</li> <li>Step 5: Follow the on-screen instructions to begin programming the new smart key remote fob. You may be prompted to insert the original key into the ignition or hold the new fob in a specific location to confirm programming.</li> <li>Step 6: If additional remotes need to be programmed, repeat the process for each remote during the same session. All remotes must be programmed at the same time, as any unprogrammed fobs will no longer work.</li> <li>Step 7: Once all remotes have been successfully programmed, follow the diagnostic tool’s instructions to exit programming mode. Disconnect the diagnostic tool from the OBD-II port.</li> <li>Step 8: Test each programmed remote to ensure proper operation of functions like lock, unlock, remote start (if equipped), and panic.</li> </ul>

2016 Land Rover Discovery Sport

Join our newsletter