2016 Lincoln MKZ

Programming a Remote Head Key for 2016 Lincoln MKZ

Important: This process allows you to program a spare Intelligent Access key for a 2016 vehicle equipped with push-button start. You must have two working, programmed keys in order to complete the procedure. Manual programming will not work with only one functional key. Ensure the vehicle is turned off and all doors are closed before beginning. Complete each step in order, following the timing requirements. If programming is not successful, wait 10 seconds and restart from Step 1. Read through the entire process before starting.

Intelligent Access Key Programming Steps:

  • Step 1: Verify that the vehicle is off and all doors are securely closed.
  • Step 2: Remove the rubber liner from the cupholder to access the key backup slot at the bottom.
  • Step 3: Place the first programmed Intelligent Access key into the slot with the buttons facing downward.
  • Step 4: Press the START/STOP button once (do not press the brake pedal).
  • Step 5: Wait 5 seconds.
  • Step 6: Press the START/STOP button again to turn off the system.
  • Step 7: Remove the first key from the slot.
  • Step 8: Within 10 seconds, place the second programmed key into the backup slot.
  • Step 9: Press the START/STOP button once.
  • Step 10: Wait 5 seconds.
  • Step 11: Press the START/STOP button again to turn off the system.
  • Step 12: Remove the second key from the slot.
  • Step 13: Wait 5 seconds, then place the new, unprogrammed key into the backup slot.
  • Step 14: Press the START/STOP button once. The vehicle will now attempt to program the new key.
  • Step 15: Remove the new key from the slot.
  • Step 16: Test the newly programmed key by locking and unlocking the doors and starting the vehicle to confirm functionality.
  • Step 17: If programming fails, wait 10 seconds, then repeat steps 1 through 16.