2016 Mitsubishi Outlander Sport

2016 Mitsubishi Outlander Sport – Keyless Entry Remote Fob & Smart Key Programming Instructions

A. Remote Head Key System Important Notice: This programming method requires two working remote head keys. If fewer than two keys are available, this procedure cannot be completed using onboard steps.

Programming the Ignition Key Portion:

  • Step 1: Insert the first programmed key into the ignition and turn it to the “ON” position (do not start the engine). Leave it in this position for 5 seconds.
  • Step 2: Turn the key back to the “LOCK” position and remove it.
  • Step 3: Within 30 seconds, insert the second programmed key into the ignition and turn it to the “ON” position.
  • Step 4: Wait approximately 10 seconds until the immobilizer light on the dashboard begins to flash.
  • Step 5: When the light begins blinking, turn the key to the “LOCK” position and remove it.
  • Step 6: Within 30 seconds, insert the new unprogrammed key into the ignition and turn it to the “ON” position. Be sure to complete this step before the immobilizer light stops blinking.
  • Step 7: If the key is accepted, the immobilizer light will remain on for 3 seconds, then turn off. If the light turns off early or does not illuminate, the process was unsuccessful.
  • Step 8: To program additional keys, repeat Steps 1 through 7. Programming the Remote Functions (Lock/Unlock):

Note: This procedure only programs the remote button functions. The key blade must already be programmed.

  • Step 1: Gather all remotes (new and currently working) that you want to program.
  • Step 2: Using a functioning remote, press and hold the UNLOCK button for 4 to 10 seconds.
  • Step 3: While continuing to hold the UNLOCK button, press and hold the LOCK button as well.
  • Step 4: Within 10 seconds, release the LOCK and UNLOCK buttons in sequence. The doors will lock and unlock to confirm entry into programming mode. All remotes, except the one used for this step, are now erased.
  • Step 5: Within 60 seconds, program each additional remote by doing the following: Press and hold both LOCK and UNLOCK buttons for 2 seconds Release both buttons for 1 second Press and release the UNLOCK button
  • Step 6: The doors will lock and unlock to confirm that the remote was accepted.
  • Step 7: Repeat Step 5 for each additional remote within the 60-second programming window.
  • Step 8: If no remotes are added within 60 seconds, the system will exit programming mode.
  • Step 9: Test all remotes to ensure full functionality.

B. Smart Key System Important Notice: To program a new Smart Key using the vehicle’s onboard procedure, you must have two working Smart Keys. Without two, this process cannot be completed.

Smart Key Programming Procedure:

  • Step 1: Open the driver’s door and leave it open throughout the entire programming process. Do not open or close any other doors.
  • Step 2: Carry the first working Smart Key with you and turn the ignition to the “ON” position (do not start the engine). Begin the next steps within 30 seconds.
  • Step 3: Insert the new, unprogrammed Smart Key into the vehicle’s key slot in the proper direction.
  • Step 4: With the first Smart Key, press and hold the UNLOCK button for 4 to 10 seconds, then press and hold the LOCK button while still holding UNLOCK.
  • Step 5: Release the LOCK and UNLOCK buttons in sequence within 10 seconds of pressing the LOCK button.
  • Step 6: With the second Smart Key, repeat the same process: Press and hold the UNLOCK button for 4 to 10 seconds Press and hold the LOCK button Release both buttons in order within 10 seconds
  • Step 7: The immobilizer indicator in the multi-information display will begin blinking. If programming is successful, a buzzer will sound three times and the immobilizer display will remain on for 30 seconds.
  • Step 8: If programming fails, a long tone will sound for 3 seconds, and the process will be terminated.
  • Step 9: To program another Smart Key, turn off the ignition, remove the newly added key, and repeat the process from Step 1.