2017 Lincoln MKZ

Programming a Remote Head Key for 2017 Lincoln MKZ

Important: This procedure is used to program a spare Intelligent Access key for a 2017 model with push-button start. To complete the process, you must have two previously programmed keys and one new, unprogrammed key. This method will not work with fewer than two recognized keys. Make sure the vehicle is turned off and all doors are completely closed. Follow each step precisely, including all timing requirements. If programming fails, wait 10 seconds and restart from Step 1. Review the full process before beginning.

Intelligent Access Key Programming Steps:

  • Step 1: Ensure the vehicle is turned off and all doors are shut.
  • Step 2: Remove the rubber mat from the cupholder to reveal the key backup slot.
  • Step 3: Insert the first programmed Intelligent Access key into the backup slot with the buttons facing downward.
  • Step 4: Press the START/STOP button once (do not press the brake).
  • Step 5: Wait 5 seconds.
  • Step 6: Press the START/STOP button again to turn the system off.
  • Step 7: Remove the first key from the slot.
  • Step 8: Within 10 seconds, place the second programmed key into the backup slot.
  • Step 9: Press the START/STOP button once.
  • Step 10: Wait 5 seconds.
  • Step 11: Press the START/STOP button again to shut the system off.
  • Step 12: Remove the second key from the slot.
  • Step 13: Wait 5 seconds, then place the unprogrammed key into the backup slot.
  • Step 14: Press the START/STOP button once. If successful, the vehicle will automatically recognize and program the new key.
  • Step 15: Remove the newly programmed key.
  • Step 16: Test the new key by using the remote lock/unlock functions and starting the vehicle.
  • Step 17: If the key does not function, wait 10 seconds, then repeat steps 1 through 16.