<h1>2018 Lincoln MKT Intelligent Access Key (Smart Key with Push-Button Start)</h1> <p><font size="3"><b>Important Notes:</b> You can program up to four Intelligent Access Keys to your vehicle. This procedure requires two existing, programmed keys and one new, unprogrammed key. If you do not have two working keys, the new key must be programmed by a professional using diagnostic tools. Ensure the vehicle is turned off and all doors remain closed throughout the entire process. Complete all steps within 30 seconds of starting the procedure. If any step is performed incorrectly or out of order, wait one minute before starting over. </font></p> <p><font size="3"><b>Step-by-Step Programming Process:</b></font></p> <ul> <li><font size="3">Step 1: Sit in the driver’s seat and ensure all doors are securely closed. </font></li> <li><font size="3">Step 2: Open the floor console storage compartment lid to access the backup key slot. </font></li> <li><font size="3">Step 3: Insert the first programmed Intelligent Access Key into the backup slot with the buttons facing out and key ring up. </font></li> <li><font size="3">Step 4: Without pressing the brake pedal, press the START/STOP button once. </font></li> <li><font size="3">Step 5: Wait approximately five seconds, then press the START/STOP button again to turn the ignition off. </font></li> <li><font size="3">Step 6: Remove the first key from the backup slot. </font></li> <li><font size="3">Step 7: Within 10 seconds, insert the second programmed Intelligent Access Key into the same slot. </font></li> <li><font size="3">Step 8: Press the START/STOP button again. </font></li> <li><font size="3">Step 9: Wait five seconds, then press the START/STOP button again to turn the ignition off. </font></li> <li><font size="3">Step 10: Remove the second key from the slot. </font></li> <li><font size="3">Step 11: Wait another five seconds, then insert the new, unprogrammed Intelligent Access Key into the backup slot. </font></li> <li><font size="3">Step 12: Press the START/STOP button once. The vehicle will now attempt to recognize and program the new key.</font></li> <li><font size="3"> Step 13: Wait several seconds for confirmation. If successful, the new key will be accepted into the system. </font></li> <li><font size="3">Step 14: Remove the newly programmed key from the backup slot. </font></li> <li><font size="3">Step 15: Test the remote by pressing the lock and unlock buttons to verify remote entry functionality. </font></li> <li><font size="3">Step 16: With your foot on the brake pedal, press the START/STOP button to ensure the vehicle starts with the newly programmed key. If the vehicle starts and remote functions operate correctly, programming is complete. If unsuccessful, wait 10 seconds, then repeat the entire process starting from Step 1.</font></li> </ul>
