2019 Audi TT RS

<h1>2019 Audi TT RS Remote Key Fob (Smart Key)</h1> Important Note: The 2019 Audi TT RS does not support onboard (manual) programming for smart key remotes. Programming must be performed using specialized diagnostic tools that can access the vehicle’s immobilizer and key registration system. Step-by-Step Smart Key Programming Instructions: <ul> <li> Step 1: Verify Key Compatibility Make sure the replacement smart key is specifically designed for the 2019 Audi TT RS. It must be new or properly cleared from prior programming to another vehicle. </li> <li>Step 2: Prepare the Vehicle Set the transmission to Park and turn off the engine. Open the driver’s door and leave it open during the process. Ensure that the vehicle’s battery is fully charged. Confirm that the new remote has a working battery installed. </li> <li>Step 3: Connect Diagnostic Equipment Locate the vehicle’s OBD-II port, positioned under the dashboard on the driver’s side. Connect a diagnostic tool capable of communicating with the Audi key system (such as ODIS or an equivalent). Launch the diagnostic software and allow it to identify the vehicle’s modules. </li> <li>Step 4: Access Key Programming Menu In the software, navigate to the Immobilizer or Key Learning section. Authenticate with a security access code or login credentials when prompted. Select the option to add or program a new key. </li> <li>Step 5: Program the Smart Key When instructed, place the new key fob in the key reader area—typically near the steering column or center console. Follow prompts to begin the key synchronization process. The system will recognize the key and link it to the vehicle’s electronic immobilizer. </li> <li>Step 6: Program Additional Keys (Optional) If more than one remote is being programmed, repeat the previous step while the system remains in programming mode. Most Audi models support up to eight active keys. </li> <li>Step 7: Confirm Successful Programming Test the newly programmed remote to verify functionality: Lock/unlock doors Trunk operation Push-button engine start Passive entry (if equipped) </li> <li>Step 8: Finalize the Process Exit programming mode via the diagnostic software. Disconnect the equipment from the OBD-II port. Ensure all programmed keys are tested and fully functional. </li> </ul> Additional Notes: Some systems may erase unrecognized remotes during programming—ensure all current keys are present. If the system fails to accept a key, restart from Step 3. Only use tools approved for Audi key systems to avoid errors or failed programming.

2019 Audi TT RS

Join our newsletter