2019 Land Rover Discovery Sport

<h1>2019 Land Rover Discovery Sport – Keyless Entry Remote Fob Programming Instructions</h1> Note: The 2019 Land Rover Discovery Sport does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment to interface with the vehicle’s keyless entry and security systems. Step-by-Step Programming Instructions: <ul> <li>Step 1: Ensure the replacement smart key remote fob is compatible with the 2019 Land Rover Discovery Sport, including the correct part number and operating frequency.</li> <li>Step 2: Confirm that the vehicle’s battery is fully charged and in good condition. Close all doors, the trunk, and the hood to prevent interruptions during programming.</li> <li>Step 3: Connect a compatible diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to the OBD-II port, located beneath the dashboard on the driver’s side.</li> <li>Step 4: Use the diagnostic tool to access the Body Control Module (BCM) or Keyless Entry/Immobilizer section to begin the programming process.</li> <li>Step 5: Follow the instructions on the diagnostic tool to start programming the new smart key remote fob. You may need to insert the original key or fob into the ignition or press certain buttons on the remote to confirm programming.</li> <li>Step 6: If you need to program additional remotes, repeat the process for each remote during the same session. Ensure all remotes are programmed together, as any unprogrammed remotes will no longer work.</li> <li>Step 7: Once all remotes are successfully programmed, follow the diagnostic tool’s instructions to exit programming mode. Disconnect the diagnostic tool from the OBD-II port.</li> <li>Step 8: Test each remote fob to ensure proper operation of functions such as lock, unlock, remote start, and panic.</li> </ul>

2019 Land Rover Discovery Sport

Join our newsletter