<h1>2019 Lincoln MKT Intelligent Access Key (Smart Key with Push-Button Start)</h1> <p><font size="3"><b> Important Notes:</b> A maximum of four Intelligent Access Keys can be programmed to your vehicle. You must have two existing, programmed keys and one new, unprogrammed key to complete this procedure. If you have only one working key or no keys at all, the new key must be programmed by a professional using diagnostic equipment. Ensure the ignition is off and that all doors remain closed throughout the process. Complete all steps within 30 seconds of starting. If steps are not followed correctly, wait at least one minute before trying again. Read through the entire procedure before beginning. </font></p> <p><font size="3"><b>Step-by-Step Programming Procedure:</b></font></p> <ul> <li><font size="3">Step 1: Sit inside the vehicle and make sure all doors are fully closed. </font></li> <li><font size="3">Step 2: Open the center console lid to access the backup key slot. </font></li> <li><font size="3">Step 3: Insert the first programmed Intelligent Access Key into the backup slot with the buttons facing up and the unlock button toward the front of the vehicle. </font></li> <li><font size="3">Step 4: Without pressing the brake pedal, press the START/STOP button once to activate the ignition. </font></li> <li><font size="3">Step 5: Wait five seconds, then press the START/STOP button again to switch off the ignition.</font></li> <li><font size="3"> Step 6: Remove the first key from the backup slot. </font></li> <li><font size="3">Step 7: Within 10 seconds, insert the second programmed Intelligent Access Key into the backup slot.</font></li> <li><font size="3"> Step 8: Press the START/STOP button once again.</font></li> <li><font size="3"> Step 9: Wait five seconds, then press the START/STOP button again to turn off the ignition. </font></li> <li><font size="3">Step 10: Remove the second key from the slot.</font></li> <li><font size="3"> Step 11: Wait five seconds, then insert the new, unprogrammed Intelligent Access Key into the backup slot. </font></li> <li><font size="3">Step 12: Press the START/STOP button. The vehicle will attempt to recognize and program the new key.</font></li> <li><font size="3"> Step 13: Wait several seconds. If programming is successful, the key will be stored and accepted by the system. </font></li> <li><font size="3">Step 14: Remove the newly programmed key from the slot.</font></li> <li><font size="3"> Step 15: Test the key by pressing the lock and unlock buttons on the fob to confirm remote entry functionality. </font></li> <li><font size="3">Step 16: Press the brake pedal and then the START/STOP button to confirm that the vehicle starts with the newly programmed key. Programming complete if remote and start functions operate correctly. If programming fails, wait 10 seconds, then repeat Steps 1 through 16.</font></li> </ul>
