2019 Mitsubishi Outlander Sport

Programming Guide for 2019 Mitsubishi Outlander Sport Keyless Entry Fob and Smart Key

A. Standard Key or Remote Head Key Programming (Immobilizer Portion Only)

Note: This method requires two previously programmed working keys.

  • Step 1: Insert the first programmed key into the ignition and turn it to the ON position (do not start the engine). Leave it on for 5 seconds.
  • Step 2: Turn the key to the LOCK position and remove it from the ignition.
  • Step 3: Within 30 seconds, insert the second programmed key and turn it to the ON position. Wait approximately 10 seconds until the immobilizer indicator light begins to blink.
  • Step 4: When the immobilizer light begins blinking, turn the second key to the LOCK position and remove it.
  • Step 5: Within 30 seconds, insert the new unprogrammed key and turn it to the ON position. This must be done within 30 seconds of the immobilizer light starting to blink.
  • Step 6: When programming is successful, the immobilizer light will turn on for 3 seconds and then go out. If programming fails, the light will turn off during the process. Restart from Step 1 if needed.
  • Step 7: To program additional keys, repeat Steps 1 through 6.

B. Remote Portion Programming (Remote Head Key Only)

Note: Requires at least one working remote.

  • Step 1: Prepare all current and new remotes you intend to program.
  • Step 2: Using a currently programmed remote, press and hold the UNLOCK button for 4 to 10 seconds.
  • Step 3: While still holding UNLOCK, press and hold the LOCK button.
  • Step 4: Within 10 seconds, release the LOCK button first, then release the UNLOCK button. The vehicle will enter programming mode, confirmed by the doors locking and unlocking once. Only the remote used to initiate the process remains programmed—all others must now be reprogrammed.
  • Step 5: Within 60 seconds, program each additional remote as follows: a. Press both LOCK and UNLOCK buttons at the same time for 2 seconds b. Release both buttons for 1 second c. Press and release the UNLOCK button
  • Step 6: The doors will lock and unlock to confirm successful programming of each remote.
  • Step 7: Repeat Step 5 within 60 seconds for each additional remote.
  • Step 8: After 60 seconds of inactivity, the system exits programming mode automatically.
  • Step 9: Test all remotes to ensure proper functionality.

C. Smart Key Programming (Push-to-Start System)

Note: Requires two previously programmed Smart Keys. Not applicable to Canadian models.

  • Step 1: Open the driver’s door and leave it open throughout the entire procedure. Do not open or close any other doors.
  • Step 2: With the first programmed Smart Key on your person, turn the ignition to the ON position (do not start the engine). Begin the next step within 30 seconds.
  • Step 3: Insert the new unprogrammed Smart Key into the Smart Key slot, oriented as shown in the vehicle manual.
  • Step 4: With the first programmed Smart Key still present, press and hold the UNLOCK button for 4 to 10 seconds, then press and hold the LOCK button during that time.
  • Step 5: Release the LOCK button first, then release the UNLOCK button—both must be released within 10 seconds of pressing the LOCK button.
  • Step 6: With the second programmed Smart Key, repeat the same sequence: Press and hold UNLOCK for 4 to 10 seconds, press and hold LOCK, then release LOCK, followed by UNLOCK.
  • Step 7: When successful, the immobilizer icon on the information display will blink. The vehicle will emit three beeps, and the immobilizer icon will remain illuminated for 30 seconds.
  • Step 8: If an error occurs, the system will exit and sound a single 3-second beep. Restart from Step 1 if needed.
  • Step 9: To program another Smart Key, turn the ignition OFF, remove the key from the slot, and repeat the entire procedure.