<h1>2022 Audi TTS Remote Key Fob (Smart Key)</h1> <p><font size="3"><b> Important Note:</b> The 2022 Audi TTS does not allow onboard programming for smart key remote fobs. Programming requires access to the vehicle’s onboard systems using specialized diagnostic tools. </font></p> <p><font size="3"><b>Step-by-Step Programming Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Verify Smart Key Compatibility Ensure the new smart key is compatible with the 2022 Audi TTS. The key must be unused and not linked to any other vehicle. </font></li> <li><font size="3">Step 2: Prepare the Vehicle Switch the ignition off and place the vehicle in ""Park."" Open the driver’s door, keeping all other doors closed. Have any existing functional remotes with you, as all keys may need to be reprogrammed during the same session. </font></li> <li><font size="3">Step 3: Connect Diagnostic Equipment Locate the OBD-II port under the dashboard on the driver's side. Connect certified diagnostic equipment capable of accessing the Audi immobilizer and key programming functions. </font></li> <li><font size="3">Step 4: Access Key Programming Mode Using the diagnostic software, navigate to the immobilizer/key coding section. Authenticate access to the system with the correct security credentials (PIN or access code). </font></li> <li><font size="3">Step 5: Register the New Smart Key Place the new smart key in the vehicle's designated programming area (often near the start/stop button or center console). Start the programming sequence on the diagnostic tool. Wait for confirmation on the tool or vehicle display that the remote has been successfully paired. </font></li> <li><font size="3">Step 6: Add Additional Remotes (If Needed) Repeat Step 5 for any other remotes you wish to program. Complete all programming during the same session, as the system may overwrite existing remotes if not programmed together. </font></li> <li><font size="3">Step 7: Test All Functions Check each smart key for the following: Lock and unlock doors Remote trunk release Engine start via push-button Passive entry features (if equipped)</font></li> <li><font size="3">Step 8: Finalize the Process Exit the programming mode using the diagnostic tool. Disconnect the equipment and ensure the vehicle recognizes all registered remotes.</font></li> </ul> <p><font size="3"><b> Tips for Successful Programming:</b> </font></p> <p><font size="3">Ensure each smart key has a fully charged battery. Avoid delays during each step to prevent timeout. Complete programming in an environment free from radio interference.</font></p>
