<h1>2024 Land Rover Range Rover Velar – Keyless Entry Remote Fob Programming Instructions</h1> <p><font size="3"><b>Note:</b> The 2024 Land Rover Range Rover Velar does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment to interface with the vehicle’s keyless entry and security systems.</font></p> <p><font size="3"><b> Step-by-Step Programming Instructions:</b> </font></p> <ul> <li><font size="3">Step 1: Verify that the replacement smart key remote fob is compatible with the 2024 Land Rover Range Rover Velar, including the correct part number and operating frequency. </font></li> <li><font size="3">Step 2: Ensure that the vehicle’s battery is fully charged and confirm that all doors, the trunk, and the hood are closed to prevent interruptions during the programming process. </font></li> <li><font size="3">Step 3: Use a professional-grade diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to connect to the OBD-II port, located beneath the dashboard on the driver’s side. This tool will communicate with the vehicle’s Body Control Module (BCM) and keyless entry system. </font></li> <li><font size="3">Step 4: Using the diagnostic tool, navigate to the Body Control Module (BCM) or Keyless Entry section to begin the programming process. </font></li> <li><font size="3">Step 5: Follow the instructions on the diagnostic tool to program the new smart key remote fob. You may be prompted to insert the original key or fob into the ignition or press specific buttons on the remote to confirm the programming. </font></li> <li><font size="3">Step 6: If additional remotes need to be programmed, repeat the process for each one during the same session. Ensure all remotes are programmed together, as unprogrammed remotes will no longer function. </font></li> <li><font size="3">Step 7: Once all remotes have been successfully programmed, follow the diagnostic tool’s instructions to exit programming mode. Disconnect the diagnostic tool from the OBD-II port. </font></li> <li><font size="3">Step 8: Test each programmed remote to ensure proper operation of functions such as lock, unlock, remote start, and panic.</font></li> </ul>
