2025 Land Rover Discovery

<h1>2025 Land Rover Discovery – Keyless Entry Remote Fob Programming Instructions</h1> Note: The 2025 Land Rover Discovery does not support onboard programming for keyless entry remote fobs. Programming requires specialized diagnostic equipment to interface with the vehicle’s keyless entry and security systems. Step-by-Step Programming Instructions: <ul> <li>Step 1: Verify that the replacement smart key remote fob is compatible with the 2025 Land Rover Discovery, including the correct part number and frequency specifications.</li> <li>Step 2: Confirm that the vehicle’s battery is fully charged and in good condition. Close all doors, the trunk, and the hood to avoid any interruptions during programming.</li> <li>Step 3: Use a compatible diagnostic tool (such as Land Rover’s approved diagnostic system or equivalent) to connect to the OBD-II port, located beneath the dashboard on the driver’s side. This tool will interface with the vehicle’s Body Control Module (BCM) and keyless entry system.</li> <li>Step 4: Using the diagnostic tool, navigate to the Body Control Module (BCM) or Keyless Entry/Immobilizer section and initiate the programming process.</li> <li>Step 5: Follow the on-screen prompts on the diagnostic tool to program the new smart key remote fob. You may be required to insert the original key or fob into the ignition or press specific buttons on the remote to confirm the programming.</li> <li>Step 6: If additional remotes need to be programmed, repeat the programming process for each one during the same session. Ensure that all remotes are programmed together, as any unprogrammed remotes will not function.</li> <li>Step 7: Once all remotes have been successfully programmed, follow the diagnostic tool’s instructions to exit programming mode. Disconnect the diagnostic tool from the OBD-II port.</li> <li>Step 8: Test each remote fob to ensure proper operation of functions like lock, unlock, remote start, and panic.</li> </ul>

2025 Land Rover Discovery

Join our newsletter